Audio-Technica AT4051B Cardioid Condenser Microphone

Description

The Audio-Technica AT4051B Cardioid Condenser Microphone is ideal for professional recording and critical applications in broadcast. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4051B microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments.

The AT4051B mic is fully RoHS-compliant”free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS). The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule.

Recommended uses of the AT4051B are acoustic guitar, percussion, drum overheads (mainly for cymbals), and live-sound instrument recording where rear-cancellation is required.

Features

• Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
• High front-to-back rejection ratio”cardioid polar pattern improves isolation of desired sound source
• Direct-coupled, balanced output results in a clean signal even under high-output conditions
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Rugged turned-brass microphone housing for enduring dependability
• State-of-the-art design and manufacturing techniques ensure compliance with A-T´s stringent consistency and reliability standards
• RoHS-compliant”free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Specs

• Element: Externally polarized (DC bias) capacitor
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
• Impedance: 50 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
• Noise: 16 dB SPL
• Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 4.8 mA typical
• Switch: Flat, roll-off; 10 dB pad (nominal)
• Weight: 126 g (4.4 oz)
• Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Optional Interchangeable Elements (sold separately):
• AT4049b-EL (Omnidirectional);
• AT4053b-EL (hypercardioid)
• Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
• Audio-Technica Case Style: S1