Audio-Technica AT2050 Multi-Pattern Large-Diaphragm Condenser Microphone

Description

The versatile Audio-Technica AT2050 is a multi-pattern large-diaphragm condenser microphone that provides consistent, superior performance. The AT2020 mic offers you switchable cardioid, omnidirectional and figure-eight polar pattern settings. The AT2050 mic´s dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80Hz high-pass filter and 10dB pad, the Audio-Technica AT2050 microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps and more.

Features

• Three switchable polar patterns: omni, cardioid, figure-of-eight
• Switchable 80Hz high-pass filter and 10dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T´s stringent consistency and reliability standards
• Includes shockmount and protective pouch

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Specs

• Element: Externally-polarized (DC bias) condenser Externally-polarized (DC bias) condenser
• Polar Pattern: Cardioid, Omnidirectional. Figure-of-Eight
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: ”42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 KHz At Max SPL
• Signal-To-Noise Ratio: 77 dB, 1 KHz At 1 Pa
• Phantom Power Requirements: 11-52v DC, 4.7 Ma Typical
• Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
• Weight: 412 G (14.5 Oz)
• Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
• Output Connector: Integral 3-Pin XLRM-Type
• Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch
• Audio-Technica Case Style: R5